Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
- 9. Coupling, shaft
   9.1. Technical characteristics
   + 9.2. Coupling
   - 9.3. A kardannyj shaft
      9.3.1. Removal and installation карданного a shaft
      9.3.2. Replacement of the central bearing карданного a shaft
      9.3.3. Replacement of a sealing ring of the main transfer
   + 9.4. Power shafts
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment


e2a7ff6d e2a7ff6d

9.3.2. Replacement of the central bearing карданного a shaft
PERFORMANCE ORDER
1. Remove карданный a shaft.
2. Fix карданный a shaft in a vice with soft sponges.
3. Note mutual position of a flange of a forward part карданного a shaft and the hinge of a back part карданного a shaft.
4. Unscrew bolts of fastening of a back part карданного a shaft to a flange of a forward part карданного a shaft and remove a back part карданного a shaft.
5. Note mutual position of a flange and a forward part карданного a shaft.
6. Before unscrewing of a nut of fastening of a flange to a forward part of a power shaft, using выколотку, unbend fixing fillet of a nut.
7. Unscrew a nut, крепящую a flange to a forward part карданного a shaft.
.
8. Using a stripper, remove a flange from a forward part карданного a shaft.
9. Establish карданный a shaft in a vice so that the central bearing leant against sponges of a vice and, using a copper hammer, beat out a forward part карданного a shaft from the bearing.
10. Check up a condition of the central bearing карданного a shaft, thus the internal ring of the bearing should rotate smoothly and without jammings.
11. Installation is made in sequence, return to removal. Thus it is necessary to combine all earlier put labels.