Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
- 9. Coupling, shaft
   9.1. Technical characteristics
   + 9.2. Coupling
   - 9.3. A kardannyj shaft
      9.3.1. Removal and installation карданного a shaft
      9.3.2. Replacement of the central bearing карданного a shaft
      9.3.3. Replacement of a sealing ring of the main transfer
   + 9.4. Power shafts
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment


e2a7ff6d e2a7ff6d

9.3.1. Removal and installation карданного a shaft

Removal

PERFORMANCE ORDER
1. Lift the car and fix on supports.
2. A chalk or a white paint put labels of a relative positioning of different components for maintenance of correct subsequent installation. It is especially important to note an arrangement of a back part карданного a shaft in relation to a flange of the main transfer.
3. Unscrew bolts and nuts, крепящие a back part карданного a shaft to a flange of the main transfer.
4. Unscrew bolts of fastening of an arm of the central bearing (are specified by arrows).
5. Lower карданный a shaft downwards and shift it back. At removal карданного a shaft the lobby шлицевая муфта leaves gearing with conducted shaft of a transmission.

Installation

PERFORMANCE ORDER
1. Before installation карданного a shaft grease шлицы on a forward part карданного a shaft трансмиссионной with a liquid and, being careful not to damage a sealing ring, establish карданный a shaft in a transmission.
2. The further installation is made in sequence, return to removal.