Subaru Legacy

Since 1990-1998 of release

Repair and car operation

Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
- 8. Transmissions
   + 8.1. A mechanical transmission
   - 8.2. An automatic transmission
      8.2.1. Introduction
      8.2.2. Technical characteristics
      8.2.3. Diagnostics of leak of operational liquids
      8.2.4. The lever and a gear change cable
      8.2.5. A cable of a choice of transfers
      8.2.6. The switch of blocking of a starter and backing light
      8.2.7. Replacement of sealing rings
      8.2.8. Check and replacement of support of a transmission
      8.2.9. Adjustment of a brake tape
      8.2.10. Removal and transmission installation
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment

Мдф 6 мм цена за лист на сайте

8.2.8. Check and replacement of support of a transmission

Support of an automatic transmission

1. Lift the car and fix on supports.
2. Insert the lever between a forward beam and a transmission, and pressing the lever, try to move a transmission. If transmission moving considerable, is necessary to check up a condition, and probably and to replace transmission support.
3. To replace a transmission support, unscrew bolts, крепящие a support to a beam and a transmission.
4. A jack raise a transmission and remove transmission support.
5. Installation is made in sequence, return to removal.