Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
- 8. Transmissions
   + 8.1. A mechanical transmission
   - 8.2. An automatic transmission
      8.2.1. Introduction
      8.2.2. Technical characteristics
      8.2.3. Diagnostics of leak of operational liquids
      8.2.4. The lever and a gear change cable
      8.2.5. A cable of a choice of transfers
      8.2.6. The switch of blocking of a starter and backing light
      8.2.7. Replacement of sealing rings
      8.2.8. Check and replacement of support of a transmission
      8.2.9. Adjustment of a brake tape
      8.2.10. Removal and transmission installation
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment


8.2.2. Technical characteristics
THE GENERAL DATA

The tightening moments

Adjustment of a brake tape:
  – The screw:
     • a stage 1
8,0 Nanometers
     • a stage 2
To unscrew on 3 turns
  – A counternut
25 – 28 Nanometers
Nut of adjustment of displacement
5 – 8 Nanometers
Bolts of fastening of the hydrotransformer
23 – 26 Nanometers
Transmission to the engine:
  – The bottom nuts
From 34 to 40 Nanometers
  – The top bolt
From 34 to 40 Nanometers