Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
- 7. Systems of start, ignition
   7.1. Introduction
   7.2. Technical characteristics
   7.3. Accumulator check
   7.4. Accumulator gymnastics
   7.5. The accumulator
   + 7.6. Ignition system
   + 7.7. Gymnastics system
   - 7.8. System of start of the engine
      7.8.1. A starter
      7.8.2. Replacement of the traction relay
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment


e2a7ff6d e2a7ff6d

7.8.1. A starter

Removal and installation

PERFORMANCE ORDER
1. Remove a wire of weight from the accumulator.
2. Lift the car and fix on supports.
3. Disconnect wires from contacts on the traction relay of a starter.
4. Unscrew top (it is specified by an arrow in a photo at the left) and bottom (is specified by an arrow in a photo on the right) bolts of fastening of a starter.
5. Remove a starter from the engine.
6. Installation is made in sequence, return to removal.