Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
- 7. Systems of start, ignition
   7.1. Introduction
   7.2. Technical characteristics
   7.3. Accumulator check
   7.4. Accumulator gymnastics
   7.5. The accumulator
   - 7.6. Ignition system
      7.6.1. Check of system of ignition
      7.6.2. The ignition coil
      7.6.3. Check of a corner of an advancing of ignition
      7.6.4. Replacement of the block of ignition
   + 7.7. Gymnastics system
   + 7.8. System of start of the engine
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment


e2a7ff6d e2a7ff6d

7.6.4. Replacement of the block of ignition
PERFORMANCE ORDER
1. Remove a wire of weight from the accumulator.
2. Disconnect an electric socket from the ignition block.
3. Unscrew screws (fastenings of the block of ignition are specified by arrows) and remove the ignition block.
4. Installation is made in sequence, return to removal.