Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
- 7. Systems of start, ignition
   7.1. Introduction
   7.2. Technical characteristics
   7.3. Accumulator check
   7.4. Accumulator gymnastics
   7.5. The accumulator
   - 7.6. Ignition system
      7.6.1. Check of system of ignition
      7.6.2. The ignition coil
      7.6.3. Check of a corner of an advancing of ignition
      7.6.4. Replacement of the block of ignition
   + 7.7. Gymnastics system
   + 7.8. System of start of the engine
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment


e2a7ff6d e2a7ff6d

7.6.2. The ignition coil
THE GENERAL DATA

Check of resistance of a primary winding of the coil of ignition

 

Check

PERFORMANCE ORDER
1. Check up resistance of a primary winding of the coil of ignition for what include ignition and disconnect a three-contact electric socket from the ignition coil.
2. Measure resistance between contacts 1 and 2 electric sockets. The primary winding of the coil of ignition of the first and second cylinders is thus checked.
3. Measure resistance between contacts 2 and 3. Resistance of a primary winding of the coil of ignition of the third and fourth cylinders is thus checked. If resistance differs from norm, replace the ignition coil.
4. Check up resistance of a secondary winding. Connect an ohmmeter to high-voltage exits of the coil of ignition at first № 1 and 2, then 3 and 4. If resistance of the coil does not correspond to norm, replace the ignition coil.

Replacement

PERFORMANCE ORDER
1. Remove a wire of weight from the accumulator.
2. Disconnect a three-contact electric socket from the ignition coil.
3. Disconnect high-voltage wires from the ignition coil.
4. Unscrew fastening bolts (are specified by arrows) and remove the ignition coil.
5. Installation is made in sequence, return to removal.