Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
- 6. An exhaust system
   6.1. Service of final system
   - 6.2. Reduction of toxicity of exhaust gases and management of engine work
      6.2.1. Technical characteristics
      6.2.2. Self-diagnostics system (OBD) and codes
      6.2.3. The electronic control block (ECM)
      6.2.4. The gauge of temperature of a cooling liquid
      6.2.5. The gauge of position throttle заслонки
      6.2.6. Gauges of a cranked shaft, a camshaft, speed of the car
      6.2.7. The oxygen gauge
      6.2.8. The gauge of a stream of air
      6.2.9. The detonation gauge
      6.2.10. The pressure gauge in an inlet collector
      6.2.11. Replacement of the gauge of temperature of a cooling liquid
      6.2.12. Replacement of the gauge of a stream of air
      6.2.13. Replacement of the gauge of oxygen
      6.2.14. Replacement of the gauge of position throttle заслонки
      6.2.15. Replacement of the gauge of an angle of rotation of a cranked shaft
      6.2.16. Replacement of the gauge of position of a camshaft
      6.2.17. Replacement of the gauge of a detonation
      6.2.18. Replacement of the gauge of speed of the car
      6.2.19. Replacement of the gauge of pressure
      6.2.20. System of repeated burning of the fulfilled gases (EGR)
      6.2.21. System of catching of steams of fuel (EVAP)
      6.2.22. System of compulsory ventilation картера (PCV)
      6.2.23. The catalyst
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment


e2a7ff6d Клаб мед тут.
Проститутки метро юго западная читать далее.
Смотрите prostitutki-moskov.ru проститутки город московский.
На нашем интернет сайте о ФК Челси вы всегда сможете быть в курсе всех матчей
e2a7ff6d Клаб мед тут.
Проститутки метро юго западная читать далее.
Смотрите prostitutki-moskov.ru проститутки город московский.
На нашем интернет сайте о ФК Челси вы всегда сможете быть в курсе всех матчей

6.2.17. Replacement of the gauge of a detonation
THE GENERAL DATA

The prevention

Replacement of the gauge of a detonation make on the cold engine.


The detonation gauge is located under an inlet collector on the left back part of the engine.

PERFORMANCE ORDER
1. For access to the detonation gauge remove an inlet collector.
2. Merge cooling liquid from cooling system.
3. Disconnect from the gauge an electric socket.
4. Unscrew the gauge of a detonation from the block of cylinders of the engine.
5. Before installation of the new gauge of a detonation on a carving of the new gauge apply a thin film hermetic.
6. The further installation is made in sequence, return to removal.