Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
- 6. An exhaust system
   6.1. Service of final system
   - 6.2. Reduction of toxicity of exhaust gases and management of engine work
      6.2.1. Technical characteristics
      6.2.2. Self-diagnostics system (OBD) and codes
      6.2.3. The electronic control block (ECM)
      6.2.4. The gauge of temperature of a cooling liquid
      6.2.5. The gauge of position throttle заслонки
      6.2.6. Gauges of a cranked shaft, a camshaft, speed of the car
      6.2.7. The oxygen gauge
      6.2.8. The gauge of a stream of air
      6.2.9. The detonation gauge
      6.2.10. The pressure gauge in an inlet collector
      6.2.11. Replacement of the gauge of temperature of a cooling liquid
      6.2.12. Replacement of the gauge of a stream of air
      6.2.13. Replacement of the gauge of oxygen
      6.2.14. Replacement of the gauge of position throttle заслонки
      6.2.15. Replacement of the gauge of an angle of rotation of a cranked shaft
      6.2.16. Replacement of the gauge of position of a camshaft
      6.2.17. Replacement of the gauge of a detonation
      6.2.18. Replacement of the gauge of speed of the car
      6.2.19. Replacement of the gauge of pressure
      6.2.20. System of repeated burning of the fulfilled gases (EGR)
      6.2.21. System of catching of steams of fuel (EVAP)
      6.2.22. System of compulsory ventilation картера (PCV)
      6.2.23. The catalyst
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment


e2a7ff6d фонбет работающее зеркало сайта.
купить мастурбатор кокос
На www.europarts-truck.ru магазин автозапчастей для грузовиков.
e2a7ff6d фонбет работающее зеркало сайта.
купить мастурбатор кокос
На www.europarts-truck.ru магазин автозапчастей для грузовиков.

6.2.16. Replacement of the gauge of position of a camshaft
THE GENERAL DATA

Arrangement of the gauge of position of a camshaft

The gauge of position of a camshaft is established behind the left casing of a gear belt.

PERFORMANCE ORDER
1. Remove a wire of weight from the accumulator.
2. Disconnect an electric socket from the gauge.
3. Unscrew a bolt and remove the gauge.
4. Installation is made in sequence, return to removal.