Subaru Legacy

Since 1990-1998 of release

Repair and car operation

Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
- 4. Heating, ventilation
   + 4.1. Cooling system
   + 4.2. Heating system
   - 4.3. Air central air
      4.3.1. Check of a central air of air
      4.3.2. Coolant addition
      4.3.3. The Receiver / a dehumidifier
      4.3.4. The compressor
      4.3.5. The condenser
      4.3.6. The evaporator
   4.4. Climate control system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment


4.3.2. Coolant addition

The basic complete set for gymnastics of central airs of air with reagent R-134А

For coolant addition in air central air use the special complete set of gymnastics of central airs.

1. Connect the complete set of gymnastics of a central air according to the instruction applied on the complete set.
2. Screw a hose with the handle on a cylinder with a reagent. Thus check up that on an union carving the sealing ring is established.
3. Remove a dustproof cap from the gymnastics channel from outside low pressure in a central air and connect a hose from the complete set of system of gymnastics.
4. Start the engine and warm up to normal working temperature and include air central air.
5. Turn the valve handle on the gymnastics complete set while the core will not punch an aperture in a cylinder stopper then return the handle back and let out a coolant from a cylinder in a central air.