Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
- 2. Maintenance service
   2.1. Introduction
   2.2. Technical characteristics
   2.3. Periodicity of service
   2.4. Check of level of engine oil
   2.5. Level of a cooling liquid
   2.6. Level of a brake liquid and a liquid of a drive of coupling
   2.7. A liquid for a windscreen washer
   2.8. Accumulator check
   2.9. Tyres and pressure check in tyres
   2.10. Check of level of oil in an automatic transmission
   2.11. Check of level of a liquid in the steering amplifier
   2.12. Replacement of oil and the oil filter
   2.13. Check and accumulator service
   2.14. Accumulator gymnastics
   2.15. Check of system of cooling
   2.16. Check of hoses, tubes and their replacement
   2.17. Check and replacement of brushes of screen wipers
   2.18. Shift of tyres
   2.19. Suspension bracket and steering check
   2.20. Exhaust system check
   2.21. Check of level of oil in a transmission and the main transfer
   2.22. Check of level of oil in differential (the main transfer)
   2.23. Check of brake system
   2.24. Check of the vacuum amplifier of brakes
   2.25. Check of a manual brake
   2.26. Check of fuel system
   2.27. Replacement of the fuel filter
   2.28. Check and replacement приводного a belt
   2.29. Check of a free wheeling of a pedal of a brake
   2.30. Check of a free wheeling of a pedal of coupling
   2.31. Check and replacement of spark plugs
   2.32. Check of high-voltage wires
   2.33. Check and adjustment of turns of idling
   2.34. Replacement of the air filter
   2.35. Check and replacement of the valve of ventilation картера (PCV)
   2.36. Check of system of catching of steams of fuel
   2.37. Check of system of repeated burning of the fulfilled gases (EGR)
   2.38. Service of system of cooling
   2.39. Replacement of a brake liquid
   2.40. Oil replacement in an automatic transmission
   2.41. Oil replacement in a mechanical transmission
   2.42. Check and adjustment of backlashes of valves
   - 2.43. The basic malfunctions
      2.43.1. The engine
      2.43.2. Cooling system
      2.43.3. A heater
      2.43.4. Injection system
      2.43.5. Ignition system
      2.43.6. Coupling
      2.43.7. Wheels and tyres
      2.43.8. Brake system
      2.43.9. A suspension bracket and a steering
      2.43.10. The electric equipment
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment


e2a7ff6d e2a7ff6d

2.43.8. Brake system
THE GENERAL DATA

Too big course of a pedal of a brake:

  – Wrong adjustment of a pedal;
  – Back brake колодки stand too far from a drum.

Low efficiency of braking:

  – Brake disks or drums are worn out brake колодки;
  – On brake disks (drums) the brake liquid or oil has got;
  – Brake колодки do not nestle on brake drums (disks);
  – Pollution of drum-type brakes by oil;
  – The wrong type brake колодок is used;
  – Brake mechanisms are incorrectly collected;
  – The vacuum amplifier of brakes does not work.

At braking the car withdraws aside:

  – On brake колодки oil on the one hand has got;
  – Partially or the working brake cylinder is completely jammed;
  – On the different parties are used brake колодки with a different material of a friction;
  – Not co-ordinated brake disks;
  – Non-uniform deterioration of tyres of the car from the different parties;
  – There is air at brake system.

Softness of a pedal at braking:

  – Were not completely earned extra new brake колодки;
  – Bolts of fastening of the main brake cylinder are not clamped;
  – Strong deterioration of brake drums.

By pressing of a pedal of a brake against the stop brakes do not work:

  – Leak in the hydraulic system, interfering transfer of pressure from the main brake cylinder to working brake cylinders;
  – Consolidations of pistons of the main brake cylinder are worn out.

The vacuum amplifier of brakes does not work:


  – It is disconnected or негерметичен a vacuum hose;
  – The unilateral vacuum valve is faulty or incorrectly connected;
  – Internal defect of the amplifier of brakes.