Subaru Legacy

Since 1990-1998 of release

Repair and car operation


Subaru Legasi
+ 1.1. Identification numbers
- 2. Maintenance service
   2.1. Introduction
   2.2. Technical characteristics
   2.3. Periodicity of service
   2.4. Check of level of engine oil
   2.5. Level of a cooling liquid
   2.6. Level of a brake liquid and a liquid of a drive of coupling
   2.7. A liquid for a windscreen washer
   2.8. Accumulator check
   2.9. Tyres and pressure check in tyres
   2.10. Check of level of oil in an automatic transmission
   2.11. Check of level of a liquid in the steering amplifier
   2.12. Replacement of oil and the oil filter
   2.13. Check and accumulator service
   2.14. Accumulator gymnastics
   2.15. Check of system of cooling
   2.16. Check of hoses, tubes and their replacement
   2.17. Check and replacement of brushes of screen wipers
   2.18. Shift of tyres
   2.19. Suspension bracket and steering check
   2.20. Exhaust system check
   2.21. Check of level of oil in a transmission and the main transfer
   2.22. Check of level of oil in differential (the main transfer)
   2.23. Check of brake system
   2.24. Check of the vacuum amplifier of brakes
   2.25. Check of a manual brake
   2.26. Check of fuel system
   2.27. Replacement of the fuel filter
   2.28. Check and replacement приводного a belt
   2.29. Check of a free wheeling of a pedal of a brake
   2.30. Check of a free wheeling of a pedal of coupling
   2.31. Check and replacement of spark plugs
   2.32. Check of high-voltage wires
   2.33. Check and adjustment of turns of idling
   2.34. Replacement of the air filter
   2.35. Check and replacement of the valve of ventilation картера (PCV)
   2.36. Check of system of catching of steams of fuel
   2.37. Check of system of repeated burning of the fulfilled gases (EGR)
   2.38. Service of system of cooling
   2.39. Replacement of a brake liquid
   2.40. Oil replacement in an automatic transmission
   2.41. Oil replacement in a mechanical transmission
   2.42. Check and adjustment of backlashes of valves
   + 2.43. The basic malfunctions
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment


e2a7ff6d ltm либхер, bus.
Проститутки щукино смотрите на prostitutki-moskov.ru.
Смотрите на сайте Вет клиника.
Картридж лазерный с тонером черного цвета tk 3100 для принтеров FS 2100D FS.
e2a7ff6d ltm либхер, bus.
Проститутки щукино смотрите на prostitutki-moskov.ru.
Смотрите на сайте Вет клиника.
Картридж лазерный с тонером черного цвета tk 3100 для принтеров FS 2100D FS.

2.4. Check of level of engine oil
THE GENERAL DATA

Arrangement щупа for measurement of level of engine oil

Щуп for measurement of level of engine oil on a left-hand side of the engine about a stopper маслозаливной mouths.

Щуп for measurement of level of oil in the engine

PERFORMANCE ORDER
1. Establish the car on an equal horizontal platform.
2. Check of level of engine oil make in 5 minutes after engine deenergizing.
3. Take щуп for measurement of level of engine oil.
4. Using pure rags, wipe щуп from the oil rests. Insert щуп into the engine and repeatedly take it.
5. Define oil level in the engine which should be between labels F and L. The quantity of oil between labels makes 1 l.
6. Uncover маслозаливной mouths and fill in demanded quantity of oil in the engine.
7. If at check of level of oil on щупе the dirt or metal particles is found out, it is necessary to replace engine oil immediately.