Subaru Legacy

Since 1990-1998 of release

Repair and car operation

Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
- 11. A suspension bracket
   11.1. Introduction
   11.2. Technical characteristics
   + 11.3. A forward rack
   - 11.4. A rack of a back suspension bracket
      11.4.1. The back stabilizer of cross-section stability
      11.4.2. The longitudinal lever of a back suspension bracket
      11.4.3. Cross-section levers of a back suspension bracket
      11.4.4. A nave of a back suspension bracket
      11.4.5. A fixing element of a back nave
   11.5. An air self-levelled suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment

11.4.1. The back stabilizer of cross-section stability Removal and installation

PERFORMANCE ORDER

1. Lift a back part of the car and fix on supports.

2. Unscrew bolts and nuts, крепящие draught of the back stabilizer of cross-section stability.

3. Unscrew bolts, крепящие clips of basic plugs of the back stabilizer of cross-section stability.

4. Remove the back stabilizer of cross-section stability.

5. Installation is made in sequence, return to removal.