Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
- 11. A suspension bracket
   11.1. Introduction
   11.2. Technical characteristics
   - 11.3. A forward rack
      11.3.1. Repair of a forward rack
      11.3.2. The forward stabilizer of cross-section stability
      11.3.3. The bottom lever of a forward suspension bracket
      11.3.4. Replacement of the bottom hinge of a forward suspension bracket
      11.3.5. A rotary fist
   + 11.4. A rack of a back suspension bracket
   11.5. An air self-levelled suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment


e2a7ff6d e2a7ff6d

11.3.4. Replacement of the bottom hinge of a forward suspension bracket
PERFORMANCE ORDER
1. Lift a forward part of the car and fix on supports. Remove a forward wheel.
2. Take шплинт fixings of a nut of the spherical hinge.
3. On some turns unscrew a nut of fastening of the spherical hinge to the bottom lever.
4. Using mount, separate the bottom lever of a forward suspension bracket from a pin of the spherical hinge.
5. Unscrew a coupling bolt of fastening of the spherical hinge to a rotary fist.
6. Using a screw-driver, expand a groove in a rotary fist and take the spherical hinge from a rotary fist.
7. Remove a ring keeping a protective cover of the spherical hinge and remove a protective cover.
8. Fill with greasing a working surface of the spherical hinge and an internal surface of a protective cover of the hinge.
9. Establish a protective cover on the spherical hinge and fix a ring.
10. Establish the spherical hinge in a rotary fist and fix a coupling bolt.
11. Establish the lever of a forward suspension bracket on the spherical hinge and fix its nut. Fix a nut from отворачивания new шплинтом.