Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
- 11. A suspension bracket
   11.1. Introduction
   11.2. Technical characteristics
   - 11.3. A forward rack
      11.3.1. Repair of a forward rack
      11.3.2. The forward stabilizer of cross-section stability
      11.3.3. The bottom lever of a forward suspension bracket
      11.3.4. Replacement of the bottom hinge of a forward suspension bracket
      11.3.5. A rotary fist
   + 11.4. A rack of a back suspension bracket
   11.5. An air self-levelled suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment


11.3.3. The bottom lever of a forward suspension bracket Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and fix on supports. Remove a corresponding forward wheel.
2. Unscrew draught of the stabilizer of cross-section stability from the bottom lever of a forward suspension bracket.
3. Unscrew a coupling bolt of fastening of the spherical hinge to the bottom lever of a forward suspension bracket.
4. Using mount, separate the bottom lever from a rotary fist.
5. Unscrew a nut and take шарнирный a bolt of fastening of a forward part of the bottom lever.
6. Unscrew bolts, крепящие a support of a back part of the bottom lever.
7. Remove the bottom lever of a forward suspension bracket.

Installation

PERFORMANCE ORDER
Installation is made in sequence, return to removal. A definitive tightening of bolts and nuts make after car installation on wheels. Check up and if necessary, adjust corners of installation of forward wheels.