Subaru Legacy

Since 1990-1998 of release

Repair and car operation

Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
- 11. A suspension bracket
   11.1. Introduction
   11.2. Technical characteristics
   - 11.3. A forward rack
      11.3.1. Repair of a forward rack
      11.3.2. The forward stabilizer of cross-section stability
      11.3.3. The bottom lever of a forward suspension bracket
      11.3.4. Replacement of the bottom hinge of a forward suspension bracket
      11.3.5. A rotary fist
   + 11.4. A rack of a back suspension bracket
   11.5. An air self-levelled suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment

11.3.2. The forward stabilizer of cross-section stability
Removal

PERFORMANCE ORDER

1. Lift a forward part of the car and fix on supports. Remove forward wheels.

2. Unscrew draughts of the stabilizer from the bottom levers of a forward suspension bracket (fastening nuts are specified by arrows).

3. Unscrew bolts of fastening of clips, крепящих the stabilizer of cross-section stability.

4. Remove the stabilizer of cross-section stability.

5. Check up the stabilizer on absence of deterioration and mechanical damages. Special attention give to a condition of plugs of installation of the stabilizer.

Installation

Installation is made in sequence, return to removal.