Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
- 10. Brake system
10.1. Introduction
10.2. Technical characteristics
10.3. Replacement brake колодок on disk brakes
10.4. A support of disk brakes
10.5. A brake disk
10.6. Replacement brake колодок drum-type brakes
10.7. The working brake cylinder
10.8. The main brake cylinder
10.9. Brake pipelines and hoses
10.10. Replacement of a regulator of pressure
10.11. Prorolling of hydraulic brake system
10.12. Adjustment of a manual brake
10.13. Replacement of a cable of a manual brake
10.14. Replacement brake колодок a manual brake on back disk brakes
10.15. Additional brake system
10.16. The vacuum amplifier of brakes
10.17. The stoplight switch
10.18. Antiblocking system of brakes (ABS)
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment
|
The prevention  At work brake колодок the brake dust which contains asbestos, unhealthy is formed. Therefore at support clearing do not use compressed air and do not inhale a dust.
Removal
| PERFORMANCE ORDER |
|
1. Unscrew a bolt and disconnect a brake hose from a support. For an exception вытекания a brake liquid, close an aperture of a brake hose a stopper. |
| 2. Replacement of a brake support is a part of procedure of replacement brake колодок (subsection 10.3 see). |
|
Installation
| PERFORMANCE ORDER |
| Installation is made in sequence, return to removal. Remove air from brake system. |
|
|
|
